How to change a Door Bowl Shield on a Hotpoint Washing Machine WMA60P

  1. Washing Machine
    How to change a Door Bowl Shield on a Hotpoint Washing Machine WMA60P
  2. Safety FirstRemove the Plug from the Mains Socket
    Safety first 2
  3. Tools required:Phillips & a small flat head  screwdriver
    Phillips & small flat screwdriver (Small)
  4. Using the phillips screwdriver remove the 2 door hinge retaining screws
    WMA 60 Door 3
  5. Remove the door from the appliance
    WMA 60 Door 4
  6. Door removed from appliance
    WMA 60 Door 5
  7. Place the door on a flat surface
    WMA 60 Door 8
  8. Using the phillips screwdriver remove 2 screws to the inner trim
    WMA 60 Door 12
  9. Remove 2 further screws to the door inner trim
    WMA 60 Door 11
  10. Using a phillips screwdriver remove 2 door hinge retaining screws from the door
    WMA 60 Door 10
  11. Using the small flat head screwdriver separate the door trim from the door face
    WMA 60 Door 13
  12. Lift the inner door trim slightly to remove 
    WMA 60 Door 15
  13. Remove the door inner trim
    WMA 60 Door 17a
  14. Door inner trim removed 
    WMA 60 Door 16a
  15. Make a note of how the door bowl sits on the door outer trim
    WMA 60 Door 18
  16. Make a note on how the door bowl sits over the door release kit
    WMA 60 Door 19
  17. Remove the door bowl
    WMA 60 Door 20
  18. Make a note of how the door bowl shield sits on the door outer trim
    WMA 60 Door 21
  19. Remove the door bowl sheild
    WMA 60 Door 22
  20. Take the new door bowl shield from its package ensuring its correct for the appliance
    WMA 60 Door Bowl Shield
  21. Fit the new door bowl shield onto the outer door trim
    WMA 60 Door 22
  22. Door bowl shield in place
    WMA 60 Door 21
  23. Replace the door bowl
    WMA 60 Door 20
  24. Door bowl in place sits over the door release kit
    WMA 60 Door 19
  25.  Door bowl in place and correct position
    WMA 60 Door 18
  26. Replace the door inner trim
    WMA 60 Door 17a
  27. Make sure the hinge and the hinge bearings are positioned correctly
    WMA 60 Door 15
  28. Push down & click the inner door trim into place
    WMA 60 Door 27
  29. Using the phillips screwdriver replace 2 door hinge retaining screws
    WMA 60 Door 10
  30. Replace 2 further screws each side of the inner door trim
    WMA 60 Door 11
  31. Replace 2 further screws securing the door release kit
    WMA 60 Door 12
  32. Position the door & hinge against the casing & replace the retaining screws
    WMA 60 Door 4
  33. Using the phillips screwdriver tighten the door hinge retaining screws
    WMA 60 Door 3

    See full range of washing machine parts and door parts here

    Tools required can be purchased here 

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Trustpilot Badge
Loading...