How to change a gas jet on a cookers hob Indesit K341 G

  1. Cooker & Oven
    How to change a gas jet on a cookers hob Indesit K341 G
  2. Safety First:Remove the Plug from the Mains Socket
    Safety first 2
  3. INDESIT K341G W/G
    K341G Image
  4. Any work carried out on the gas supply must be carried out by a Corgi registered approved engineer
  5. Locate the burner cap & burner ring base which needs replacing
    K341G Burner Cap 1
  6. Grip the burner cap and remove it
    K341G Burner Cap 2
  7. Burner cap removed
    K341G Burner Base 1
  8. Grip the burner ring base and remove it
    K341G Burner Base 2
  9. Burner ring base removed
    K341G Burner Base Removed
  10. Locate the gas jet in the burner cup 
    K341G Jet Burner 1
  11. Using a 7mm socket release the gas jet
    K341G Jet Burner 3
  12. Remove the gas jet
    K341G Jet Burner 4
  13. Take the new gas jet from its package ensuring its correct for the appliance

    Small burner Gas Jet -50

    Medium burner Gas Jet -70

    Large burner Gas Jet -86
    K341G Jet Burner
  14. Fit the new gas jet into the burner cup
    K341G Jet Burner 4
  15. Using the 7mm socket tighten the gas jet.(do not over tighten) 
    K341G Jet Burner 3
  16. New gas jet in place
    K341G Jet Burner 1
  17. Make sure the new burner ring base is located over the ignition electrode
    K341G Burner Base 3
  18.  Fit the new burner ring base
    K341G Burner Base 2
  19. Burner ring base in position
    K341G Burner Base 1
  20. Fit the burner cap
    K341G Burner Cap 2
  21. Burner cap in position
    K341G Burner Cap 1
  22. The appliance is now ready for use
    K341G Image
    See full range of oven and cooker parts here 

    Tools required can be purchased here

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Trustpilot Badge
Loading...