How to change a water inlet valve on an Indesit Integrated Dishwasher

  1. Dishwasher
    How to change a water inlet valve on an Indesit Integrated Dishwasher
  2. Safety First:Remove the Plug from the Mains Socket
    Safety first 2
  3. Tools required:Phillips Screwdriver & a small flat screwdriver
    Phillips & small flat screwdriver (Small)
  4. Indesit DI620 Integrated Dishwasher
    D1620 Door Image
  5. Using the phillips screwdriver remove the side panel retaining screws
    DI620 Side Panel 1
  6. Open the door & remove the screws behind the rubber edge cover
    DI620 Side Panel 7
  7. Remove the screws behind the rubber edge cover
    DI620 Side Panel 6
  8. Remove further screws to the side panels
    DI620 Side Panel 2 
  9. Remove 2 further screws to the side panels
    DI620 Side Panel 3
  10.  Remove further screws to the side panels
    DI620 Side Panel 4
  11.  Remove 2 further screws to the side panels
    DI620 Side Panel 5
  12. Remove the side panels on both sides
    DI620 Side Panel 8
  13. Using the phillips screwdriver remove the lower back panel retaining screw
    DI620 Rear Bottom Cover 1
  14. Remove the lower back panel
    DI620 Rear Bottom Cover 2
  15. Lower back panel removed
    DI620 Rear Bottom Cover Removed
  16. Locate the water inlet valve
    DI620 Inlet Valve 1
  17. Grip the water inlet valve & slide it out of the casing
    DI620 Inlet Valve 2
  18. Make a note of the wires (a photograph is useful) and remove them
    DI620 Inlet Valve 3
  19. Wires removed
    DI620 Inlet Valve 4
  20. Using a small flat screwdriver release the pipe clip
    DI620 Inlet Valve 5
  21. Pipe clip removed
    DI620 Inlet Valve 6
  22. Remove the water inlet valve from the pipe
    DI620 Inlet Valve 7
  23. Take the new inlet valve from its package ensuring its correct for the appliance
    DI620 Inlet Valve Image
  24. Fit the new water inlet valve to the pipe
    DI620 Inlet Valve 7
  25. New water inlet valve fitted to pipe
    DI620 Inlet Valve 6
  26. Refit the pipe clip (a new suitable jubilee clip may be easier)
    DI620 Inlet Valve 8
  27. Fit the wires to the new water inlet valve
    DI620 Inlet Valve 3
  28. Slide the new water inlet valve onto the casing
    DI620 Inlet Valve 2
  29. New water inlet valve in position
    DI620 Inlet Valve 1
  30. Replace the lower back panel
    DI620 Rear Bottom Cover 2
  31. Using the phillips screwdriver replace the lower back panel retaining screw
    DI620 Rear Bottom Cover 1
  32.  Replace the Side Panels on both sides
    DI620 Side Panel 8
  33. Using the phillips screwdriver replace 2 screws to the side panels
    DI620 Side Panel 5
  34. Replace further screws to the side panels
    DI620 Side Panel 4
  35. Replace 2 further screws to the side panels
    DI620 Side Panel 3
  36. Replace further screws to the side panels
    DI620 Side Panel 2
  37. Replace further screws to the side panels behind the rubber edge cover
    DI620 Side Panel 6
  38. Replace further screws to the side panels behind the rubber edge cover
    DI620 Side Panel 7
  39. Replace further screws to the side panels
    DI620 Side Panel 1

    See full range of dishwasher parts here

    Tools required can be purchased here 

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Trustpilot Badge
Loading...