How to replace an oven lamp holder assembly Ariston, Cannon, Creda, Hotpoint, Indesit

  1. Cooker & Oven
    How to replace an oven lamp holder assembly Ariston, Cannon, Creda, Hotpoint, Indesit
  2. Safety First:Remove the Plug from the Mains Socket
    Safety first 2
  3. Tools Required: A phillips screwdriver & a small flat screwdriver
    Phillips & small flat screwdriver (Small)
  4. Indesit (BIMS31KABIX)
    BIMS31 Image
  5. Open the door
    BIMS31 Image Door Open
  6. Remove the oven grid
    BIMS31 Grid
  7. Remove the oven drip tray
    BIMS31 Drip Tray
  8. Locate the lamp assembly inside the oven
    BIMS31 Oven Lamp 1
  9. Grip the glass lens and twist anticlockwise to release from the lamp assembly
    BIMS31 Oven Lamp 2
  10.  Remove the glass lens from the lamp assembly
    BIMS31 Oven Lamp 3
  11. Glass lens removed from the lamp assembly
    BIMS31 Oven Lamp 4
  12. Grip the lamp (bulb) and twist anticlockwise to release from the lamp assembly 
    BIMS31 Oven Lamp 5
  13. Remove the lamp (bulb) from the lamp assembly
    BIMS31 Oven Lamp 6
  14. Lamp (bulb) removed from the lamp assembly
    BIMS31 Oven Lamp 7
  15. Locate the rear panel 
    BIMS31 Rear Image
  16.  Using the phillips screwdriver remove the rear panel retaining screws
    BIMS31 Rear Panel 1
  17. Remove further rear panel retaining screws
    BIMS31 Rear Panel 2
  18. Remove further rear panel retaining screws
    BIMS31 Rear Panel 3
  19. Remove further rear panel retaining screws
    BIMS31 Rear Panel 4
  20. Tilt the rear panel outwards
    BIMS31 Rear Panel 5
  21. Locate the terminal block on the inside of the rear panel
    BIMS31 Rear Panel 6
  22. Make a note of the wires (a photograph is useful) and remove them
    BIMS31 Rear Panel 7
  23. Wires removed now remove the rear panel
    BIMS31 Rear Panel 8
  24. With the rear panel removed locate the oven lamp assembly
    BIMS31 Rear Panel Removed
  25. Make a note of the wires (a photograph is useful) and remove them BIMS31 Oven Lamp Assembly 1
  26. Wires removed from the lamp assembly
    BIMS31 Oven Lamp Assembly 2
  27. Using the small flat screwdriver gently push to release the retaining clips
    BIMS31 Oven Lamp Assembly 3
  28. Gently push to release further retaining clips
    BIMS31 Oven Lamp Assembly 4
  29. Gently push to release further retaining clips
    BIMS31 Oven Lamp Assembly 5
  30. Gently push to release further retaining clips
    BIMS31 Oven Lamp Assembly 6
  31. The oven lamp assembly can now be released from the oven casing
    BIMS31 Oven Lamp Assembly 7
  32. Let the oven lamp assembly rest on the casing & retrieve it from inside the oven
    BIMS31 Oven Lamp Assembly 9
  33. Grip the oven lamp assembly and remove it from the appliance
    BIMS31 Oven Lamp Assembly 12
  34. Oven lamp assembly removed
    BIMS31 Oven Lamp Assembly 13
  35. Take the lamp assembly from its package ensuring its correct for the appliance
    BIMS31 Oven Lamp Assembly Image
  36. Line up the new lamp assembly into the aperture 
    BIMS31 Oven Lamp Assembly 11
  37. Push the lamp assembly until it clicks into place
    BIMS31 Oven Lamp Assembly 14
  38. New lamp assembly in place at the rear of appliance
    BIMS31 Oven Lamp Assembly 2
  39. Fit the wires to the new lamp assembly
    BIMS31 Oven Lamp Assembly 1
  40. Reconnect the wire to the terminal block situated on the rear panel
    BIMS31 Rear Panel 8
  41. Wires reconnected
    BIMS31 Rear Panel 7
  42. Reposition the back panel onto the appliance
    BIMS31 Rear Panel 5
  43. Using the phillips screwdriver replace the rear panel retaining screws
    BIMS31 Rear Panel 4
  44. Replace further rear panel retaining screws
    BIMS31 Rear Panel 3
  45. Replace further rear panel retaining screws
    BIMS31 Rear Panel 2
  46. Replace further rear panel retaining screws
    BIMS31 Rear Panel 1
  47. Rear panel in place
    BIMS31 Rear Image
  48. From inside the oven fit the new lamp (bulb) to the lamp assembly
    BIMS31 Oven Lamp 6
  49. Twist the lamp (bulb) clockwise into the lamp assembly do not overtighten
    BIMS31 Oven Lamp 5
  50. Lamp (bulb) in place
    BIMS31 Oven Lamp 4
  51. Replace the glass lens to the lamp assembly
    BIMS31 Oven Lamp 3
  52. Twist the glass lens clockwise to secure do not overtighten
    BIMS31 Oven Lamp 2
  53. Glass lens in place secured to the lamp assembly
    BIMS31 Oven Lamp 1
  54. Replace the oven drip tray
    BIMS31 Drip Tray
  55. Replace the oven grid
    BIMS31 Grid
  56. The appliance is now ready for use
    BIMS31 Image
     

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Trustpilot Badge
Loading...