How to replace the curved handle/wand on a Miele vacuum cleaner

How to replace the curved handle/wand on a Miele vacuum cleaner
How to replace Miele vacuum cleaner curved handle/wand
Tools required: Craft knife
The handle you receive will contain 3 parts
Take the existing hose and check to see if there is any damage
If the hose looks like this we advise cutting back to remove damage
Using a sharp knife cut the hose
Push the collar onto the hose' make sure the part is facing the right way
Collar in correct possition
Boil some water and half fll a cup or container
Dip the end of the hose into hot water to soften
Screw the threaded end onto the hose in an anti-clockwise direction
Screw the threaded end fullyonto the hose
The collar and threaded end are now in position
Insert the hose with threaded end into the curved handle
Hose pushed fully into the curved handle
Now slide the collar up the hose and into the handle making sure the clips on the collar line up with the slots on the handle and clip into place
The hose and curved handle are now assembled and ready for use

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.