Household Appliance Spares Matching 'Adaptors'
1/4" BSP Male Coupling Screw Adaptors (Pack of 5) by Draper
£8.75 In Stock
1/4" BSP Female Coupling Screw Adaptors (Pack of 5) by Draper
£9.30 In Stock
Diamond 5 Core Kit (Ø38, 52 ,65, 117, 127mm Cores with Adaptors) by Sealey
£159.65 In Stock
Diesel Injector Master Kit by Sealey
£302.83 In Stock
Clutch Alignment Set - Commercial by Sealey
£234.70 In Stock
Speedfit® Thread Adaptor Assortment 30pc Metric & Imperial by Sealey
£73.78 In Stock
Cooling System Pressure Test Kit 5pc by Sealey
£209.68 In Stock
SAC Clutch Alignment Tool by Sealey
£471.19 In Stock
Inflation Adaptors by Draper
£5.37 In Stock
Engine Oil Funnel Set 3pc - Renault, Nissan by Sealey
£30.51 In Stock
Latest Product Reviews
Universal Cooker Oven Grill Control Knobs And Adaptors White Fits All Gas Electric x 6
Good at the price
Have you ever had a cooker knob break and discovered that a replacement will cost anything up to £30? That's if you can find a supplier that isn't out of stock. This set of knobs will most likely save the day.
They work well enough though with a couple of minor niggles.
1) The adapters have no springs; and while they are a neat fit on the shafts (no slop), they pull off a little too easily. No doubt a dab of something sticky would fix this.
2) The way in which the adapters attach to the knobs restricts your choice of angle to the nearest 15 degrees. There may be no way to get the knob upright when in the Off' position. Apart from the aesthetics, this will have to be allowed for if the knob sets your oven temperature. Better design could have eliminated this problem.
All that having been said, they're still good value. Also, if your original knob is intact except for the spindle (a common failure), and if your DIY skills are up to it, you could try cutting the broken spindle off the old knob and solvent welding an adapter in its place. I'm going to give it a go.
Update: I cut a deep notch into the end of a long spindle so that the remaining edges would go all the way into the knob. It's glued in with araldite and stronger than the original. It's also angled perfectly.
Anonymous
byUniversal Cooker Oven Grill Control Knobs And Adaptors Silver Fits All Gas Electric x 6
Good enough at the price
The knobs were for a Belling cooker (model uncertain). The small adapters were a good fit on the spindles but I had to shorten the long ones to get the right length. This isn't difficult with a junior hacksaw. The cut ends are a much tighter fit in the knobs than the original ones. If you're using the full length, you'll most likely want to glue them in, but don't rush in because ---.
This is the second batch of this kind of knob I've used and both have had the same problem: the assembled knobs don't all sit at the correct angle. After much swapping of adapters between knobs, I eventually found a combination that was good enough.
Stephen
byUniversal Cooker Oven Grill Control Knobs And Adaptors Black Fits All Gas Electric x 4
cooker Knobs
Work fine and a good price for 4 items
Geoff
byUniversal Cooker Oven Grill Control Knobs And Adaptors Silver Fits All Gas Electric x 8
Good alternative
To replace the cooker knobs with the original ones would have cost me £30 x 6 so using these I saved £170
They were easy enough to install just use the adapter that matches your 'D' and push the knobs in- mine fell off initially so I put them on then pushed hard with the palm of my hand & they were fine
Claire
byUniversal Cooker Oven Grill Control Knobs And Adaptors Silver Fits All Gas Electric x 4
Universal Knobs
An excellent product which did the job perfectly.
Highly recommended.
Very prompt and helpful service.
John
by