Hotpoint EW82S Cooker and Oven Elements
Hotpoint EW82S Element1500 Twin Cer 200mm Ceramic for //Cannon Cookers and Ovens by Creda
Hotpoint EW82S Grill High Speed Element for /Creda/Cannon/Jackson Cookers and Ovens by Hotpoint
Hotpoint EW82S Grill High Speed Element for //Cannon/Jackson Cookers and Ovens by Creda
Hotpoint EW82S Base Elem Tray Topov for //Indesit/Cannon Cookers and Ovens by Creda
Hotpoint EW82S Fan Oven Heating Element - 2500w for /Creda/Cannon Cookers and Ovens by Hotpoint
Hotpoint EW82S Base Element for /Creda/Indesit/Cannon Cookers and Ovens by Hotpoint
Hotpoint EW82S Element 1200 Ceramic 165mm for /Creda/Cannon/Jackson Cookers and Ovens by Hotpoint
£32.48 Out of Stock
Email me when back in stock - we'll try to re-stock quickly!
Latest Hotpoint EW82S Cooker and Oven Elements Product Reviews
Fan Oven Heating Element - 2500w for Hotpoint/Creda/Cannon Cookers and Ovens
Spot on!
Ordered an element for my fan oven…absolutely spot on and easy to fit, even for a girly! Delivered promptly and well packaged. No worries!
Tam
byFan Oven Heating Element - 2500w for Hotpoint/Creda/Cannon Cookers and Ovens
Good price
Perfect replacement main fan oven element for our Cannon Henley 10585G cooker.
Seemed to be labeled up as a genuine spare part and a decent price as well.
Kevin
byFan Oven Heating Element - 2500w for Hotpoint/Creda/Cannon Cookers and Ovens
Hot Hotpoint Oven
My Hotpoint Oven now heats up and cooks my dinner which is a big improvement over the old element.
5 minutes armed with a screwdriver had old failed element removed and the new working element installed.
Robert
byFan Oven Heating Element - 2500w for Hotpoint/Creda/Cannon Cookers and Ovens
This was a replacement fan oven element for a Hotpoint UY46X double oven. So far it is doing the job and looks fairly well made. Nice to be able to get spares for an obsolete oven.
Robin
byElement1500 Twin Cer 200mm Ceramic for Creda/Hotpoint/Cannon Cookers and Ovens
Good Quality Replacement.
Purchased to replace the twin element on an old Creda Concept 48301 where the outer ring had broken. The replacement looks less substantial than the original but good quality nonetheless. Fitting is straightforward if you are a reasonably competent DIYer and are familiar with wiring. If not, get a professional. This is the first hob element that I have replaced. It wasn't a straight swap, however, as the terminals were in a different place : the heat control unit being more compact. Consequently I had to determine where to mount it to allow the cables to fit without straining. This can easily be done by adjusting the orientation of the element, guiding marks for the hob mounting bracket being provided on the underside. It took me 3 attempts to find the best place. The mounting bracket is screwed into the ceramic of the element, which seems rather fragile, so I did this by hand.
In conclusion, it appears to be a good quality replacement which works well, is silent and heats up fast.
Ian
by