Indesit 48306R Cooker and Oven Spares and Parts
Buy genuine Indesit 48306R Cooker and Oven spares and parts. Price match guarantee. Next day UK delivery. We stock Cooker and Oven spares for Doors, Elements, Fans and Grill Pans.
Indesit 48306R Cooker and Oven Spares
Indesit 48306R Light Screen for /Creda Cookers and Ovens by Hotpoint
Indesit 48306R Oven Fan for /Jackson Cookers and Ovens by Creda
Indesit 48306R Fan Motor Cooling for /Hotpoint/Jackson Cookers and Ovens by Creda
Indesit 48306R Starter Swt Holder for /Jackson/Hotpoint/Cannon Cookers and Ovens/Microwave by Creda
Indesit 48306R Striker Door for /Hotpoint/Jackson Cookers and Ovens by Creda
Indesit 48306R Element1500 Twin Cer 200mm Ceramic for /Hotpoint/Cannon Cookers and Ovens by Creda
Indesit 48306R Dble Sided Tape Roll To Hold Timer Lens for /Hotpoint Cookers and Ovens by Creda
Indesit 48306R Foil Tape 3m X 7cm for /Creda/Cannon/Jackson Cookers and Ovens by Hotpoint
Indesit 48306R Cooker & Hob M5x10 Screw for /Cannon/Hotpoint/Jackson Cookers and Ovens by Creda
Indesit 48306R Mesh Grille for /Hotpoint/Jackson/Wrighton Cookers and Ovens/Microwave by Creda
Latest Indesit 48306R Cooker and Oven Product Reviews
Top Oven Half Grill Element 1330w for Hotpoint/Creda/Indesit Cookers and Ovens
An excellent replacement
The failed element is held in by one screw and is connected in by two spade connectors on the ends of wires that disappear through holes in the back wall. To make sure that I didn't lose the wires, I pulled some slack through then put bulldog clips on the wires before disconnecting them from the element. I put the new element in roughly its position and put the spade connectors on the terminals before removing the bulldog clips. Then I put it in its final position and replaced the screw. A doddle!
by MR J F
Grill Pan Grid for Hotpoint/Creda/Indesit/Cannon Cookers and Ovens
Grill Pan Lid
Our grill grid was showing bare metal after 6 years of use. This replacement is very good quality, half the price of an Indesit original and was very quickly delivered. What’s not to like.
by Graham
Element1500 Twin Cer 200mm Ceramic for Creda/Hotpoint/Cannon Cookers and Ovens
Good Quality Replacement.
Purchased to replace the twin element on an old Creda Concept 48301 where the outer ring had broken. The replacement looks less substantial than the original but good quality nonetheless. Fitting is straightforward if you are a reasonably competent DIYer and are familiar with wiring. If not, get a professional. This is the first hob element that I have replaced. It wasn't a straight swap, however, as the terminals were in a different place : the heat control unit being more compact. Consequently I had to determine where to mount it to allow the cables to fit without straining. This can easily be done by adjusting the orientation of the element, guiding marks for the hob mounting bracket being provided on the underside. It took me 3 attempts to find the best place. The mounting bracket is screwed into the ceramic of the element, which seems rather fragile, so I did this by hand.
In conclusion, it appears to be a good quality replacement which works well, is silent and heats up fast.
by Ian
Top Oven Half Grill Element 1330w for Hotpoint/Creda/Indesit Cookers and Ovens
Thumbs Up.
Never thought it would be so easy to get a replacement part for a 27 year old cooker. And an easy fit for a non-pro.
by Michael
Top Oven Half Grill Element 1330w for Hotpoint/Creda/Indesit Cookers and Ovens
John Monk
Very good service and a very good for money product.Arrived on time and can't fault yourspares in anyway.Would deffinatly recommend this company.
by John
