How to change a dishwasher pressure switch
How to change a dishwasher pressure switch- Safety first remove plug from mains socket
- Tools required are a pair of mole grips and a phillips screwdriver.
- Using the phillips screwdriver remove 2 screws and remove lid.
- Using the phillips screwdriver remove inner screws both sides of door
- Using the phillips screwdriver remove 2 outer screws and remove door panel
- Using the phillips screwdriver remove 2 screws and remove front bottom closure.
- Using the phillips screwdriver remove screws and remove side panels
- Lay the machine on its back to expose the bottom use a cloth to protect surface
- Using the phillips screwdriver remove retaining screws from bottom
- Using the phillips screwdriver remove retaining screws from cover plate
- Using the phillips screwdriver remove retaining screws and remove legs
- Using the phillips screwdriver remove remaining screws
- Remove metal cover plate
- Lift base panel from locating lugs on left side
- Un clip from the right side and remove base panel
- Using the phillips screwdriver remove screws to angled cover plate
- Using the phillips screwdriver remove further screws to angled cover plate
- Remove angled cover plate
- Using the phillips screwdriver remove retaining screws to plastic bottom
- Using the phillips screwdriver remove further retaining screws to plastic bottom
- You can now pull the plastic bottom towards you, do not remove completely.
- 2 pressure switches in position, the operation for change is the same for both.
- Grip the pressure switch and pull away from support kit
- Make a note of wires (a photograph is useful) and remove them.
- Take the new pressure switch from its package ensuring its correct for appliance
Click image to purchase
- Fit wires to new pressure switch.
- Fit new pressure switch into support kit
- Pressure switch in possition
- You can now push the plastic bottom back in and relocate back in appliance.
- Using the phillips screwdriver refit retaining screws to plastic bottom
- Using the phillips screwdriver refit further retaining screws to plastic bottom
- Replace angled cover plate
- Using the phillips screwdriver refit screws to angled cover plate
- Using the phillips screwdriver refit further screws to angled cover plate
- Re-clip from the right side and replace base panel.
- Lift base panel into locating lugs on left side
- Refit metal cover plate
- Using the phillips screwdriver replace the screws
- Using the phillips screwdriver refit the legs
- Using the phillips screwdriver replace remaining screws
- Using the phillips screwdriver replace retaining screws to bottom.
- The appliance can now be stood up
- Using the phillips screwdriver replace side panels and replace screws.
- Using the phillips screwdriver replace bottom closure securing with 2 screws
- Using the phillips screwdriver replace door panel securing the 2 outer screws
- Using the phillips screwdriver replace inner screws both sides of door
- Using the phillips screwdriver replace lid securing with 2 screws
See full range of dishwasher spares here
Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.
Comments