How to change a grill energy regulator switch on an oven Ariston, Cannon, Creda, Hotpoint, Indesit

  1. Cooker & Oven
    How to change a grill energy regulator switch on an oven Ariston, Cannon, Creda, Hotpoint, Indesit
  2. Safety First:Remove the Plug from the Mains Socket
    Safety first 2
  3. Tools Required: A Phillips Screwdriver
    Phillips screwdriver (small)
  4. Indesit (BIMS31KABIX)
    BIMS31 Image
  5. Locate the grill control knob on the control panel
    BIMS31 Control Knob 1a
  6. Grip the control knob and pull towards you
    BIMS31 Control Knob 1b
  7. Remove the control knob from the spindle
    BIMS31 Control Knob 1c
  8. Control knob removed
    BIMS31 Control Knob 1d
  9. Using the phillips screwdriver remove the control panel retaining screws
    BIMS31 Control Panel 1
  10. Remove further control panel retaining screws
    BIMS31 Control Panel 2
  11. Remove further control panel retaining screws
    BIMS31 Control Panel 3
  12. Remove further control panel retaining screws
    BIMS31 Control Panel 4
  13. Remove further control panel retaining screws
    BIMS31 Control Panel 5
  14. Grip the control panel and lift away from the appliance
    BIMS31 Control Panel 7a
  15. Using the phillips screwdriver remove the grill regulator switch retaining screw
    BIMS31 Grill Energy Regulator Switch 1
  16. Remove the grill regulator switch retaining screw
    BIMS31 Grill Energy Regulator Switch 2
  17. Remove the grill regulator switch from the control panel
    BIMS31 Grill Energy Regulator Switch 4
  18. Make a note of the wires (a photograph is useful) and remove them
    BIMS31 Grill Energy Regulator Switch 5
  19. Wires removed
    BIMS31 Grill Energy Regulator Switch 6
  20. Take the new grill energy regulator switch from its package ensuring its correct for the appliance
    BIMS31 Grill Energy Regulator Switch Image
  21. Fit the wires to the new regulator switch ensuring there in the correct position
    BIMS31 Grill Energy Regulator Switch 5
  22. Fit the new regulator switch into the control panel
    BIMS31 Grill Energy Regulator Switch 4
  23. Replace the screws to the new regulator switch
    BIMS31 Grill Energy Regulator Switch 2
  24. Replace the screws to the new regulator switch
    BIMS31 Grill Energy Regulator Switch 1
  25. Relocate the control panel onto the appliance
    BIMS31 Control Panel 7a
  26. Using the phillips screwdriver replace the control panel retaining screws
    BIMS31 Control Panel 4
  27. Replace further control panel retaining screws
    BIMS31 Control Panel 3
  28. Replace further control panel retaining screws
    BIMS31 Control Panel 2
  29. Replace further control panel retaining screws
    BIMS31 Control Panel 1
  30. Replace further control panel retaining screws
    BIMS31 Control Panel 5
  31. Make sure the control knob is lined up with the D shape on the spindle
    BIMS31 Control Knob 1c
  32. Push the control knob onto the spindle
    BIMS31 Control Knob 1b
  33. Control knob in place
    BIMS31 Control Knob 1a
  34. The appliance is now ready for use
    BIMS31 Image


     

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Loading...
Need help?