How to change a warming drawer door on a cooker Indesit K341G
- How to change a warming drawer door on a cooker Indesit K341G
- Safety First:Remove the Plug from the Mains Socket
- Tools Required: Phillips screwdriver
- INDESIT K341G W/G
- Using the phillips screwdriver remove warming drawer door retaining screws
- Remove further warming drawer door retaining screws
- Remove warming drawer door retaining screws on the opposite side
- Remove further warming drawer door retaining screws
- Remove warming drawer door from appliance
- Appliance with warming drawer door removed
- Warming drawer door
- Using the phillips screwdriver remove the fascia retaining screws
- Remove further fascia retaining screws
- Un clip the fascia from the door
- Un clip the fascia from the door on the opposite side
- Un clip the fascia from the door bottom
- Remove fascia from the door
- Door with fascia removed
- Locate the warming drawer door support hinges
- Using your thumb push the support arm
- Push the support arm until it releases from the door
- Support arm released from the door now repeat on the opposite hinge
- Locate the hinge on the bottom of the door
- Twist the hinge away from the door now repeat on the opposite hinge
- Make a note of the position of the support arm & hinges (a photograph is useful)
- Take the new door from its package ensuring its correct for the appliance
- Now fit the support arm and hinges to the new door
- Position the hinge onto the bottom of the door
- Push the hinge into place
- Position the support arm onto the door
- Push the support arm into place
- Support arm clipped into place now repeat on the opposite hinge
- Replace fascia to the door
- Locate the fascia to the bottom of the door
- Clip the fascia into place
- Fascia in place on the door
- Clip the fascia into place on the opposite side
- Fascia in place on the opposite side of the door
- Using the phillips screwdriver replace the fascia retaining screws
- Replace further fascia retaining screws
- Warming drawer door with fascia attached
- Locate warming drawer door onto appliance
- Line up the warming drawer door hinge with the screw holes
- Line up the warming drawer door hinge with the screw holes opposite side
- Using the phillips screwdriver replace the retaining screws
- Replace further retaining screws
- Replace further retaining screws on the opposite side
- Replace further retaining screws
- The appliance is now ready for use
Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.
Comments