How to change control module on a washing machine Hotpoint WMA 60P

  1. Washing Machine
    How to change control module on a washing machine Hotpoint WMA 60P
  2. Safety First: Remove the plug from the mains socket
    Safety First
  3. Tools required are a phillips screwdriver and a T15 torx spanner
    Phillips screwdriver, T10 torque
  4. A small  flat head screwdriver
    Tools for sebo sole plate
  5. Remove the screw cover caps on both sides of the lid
    WMA 60 lid 1
  6. Using the T15 torx spanner remove 2 lid retaining screws
    WMA 60 lid 2
  7. Lift the lid slightly
    WMA 60 lid 3
  8. Push the lid back and remove it
    WMA 60 lid 4
  9. Lid removed
    WMA 60 lid removed
  10. Remove the soap dispenser
    WMA 60 Soap Dispencer removal
  11. Using the phillips screwdriver remove 3 console retaining screws
    WMA 60 Console 1
  12. From the left pull the console away from the machine
    WMA 60 Console 2
  13. From the right un-clip the console
    WMA 60 Console 3
  14. Make a note of the wires (a photograph is useful)
    WMA 60 Console 4
  15. Release the wires from the control module by pushing them away 
    WMA 60 Console 5
  16. Wires released now remove the console 
    WMA 60 Console 6
  17. Console removed from machine
    WMA 60 Console removed
  18. Using the flat head screwdriver un-clip the control module
    WMA 60 Control module 1
  19. Release a further clip on the control module
    WMA 60 Control module 2
  20. Remove the control module
    WMA 60 Control module 3
  21. Control module removed
    WMA 60 Control module 4
  22. Take the new control module from its package ensuring its correct for appliance
    WMA 60 Control module image
  23. Faults in PCBs are generally caused by faults elswhere in the appliance
    These faults should be corrected first to prevent further damage to the new PCBs
    The installation of PCBs should be carried out by a qualified electrician
    Manufacturers will not guarantee PCBs not fitted by a qualified electrician

  24. locate the new control module onto the console and clip it into place
    WMA 60 Control module 3
  25. The console is now ready to be fitted to machine
    WMA 60 Console buttons replaced 2
  26. Attach the wires to the control module
    WMA 60 Console 6
  27. Wires attached
    WMA 60 Console 4
  28. From the right clip the console into the machine
    WMA 60 Console 3
  29. From the left push the console into the machine to locate it
    WMA 60 Console 2
  30. Using the phillips screwdriver replace the 3 console retaining screws
    WMA 60 Console 1
  31. Replace the soap dispenser
    WMA 60 Soap Dispencer removal
  32. Relocate the lid and slide forward to engage it
    WMA 60 lid 4
  33. Using the T15 torx spanner replace the 2 lid retaining screws
    WMA 60 lid 2
  34. Replace the 2 screw cover caps
    WMA 60 lid 1
    See full range of washing machine parts here

          Tools required can be purchased here


Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Loading...
Need help?