How to change solenoid inlet valves on a washing machine Hotpoint WMA 60P

How to change solenoid inlet valves on a washing machine Hotpoint WMA 60P
Safety First: Remove the plug from the mains socket
Tools required are a phillips screwdriver and a T15 torx spanner
Remove the screw cover caps on both sides of the lid
Using the T15 torx spanner remove 2 lid retaining screws
Lift the lid slightly
Push the lid back and remove it
Lid removed
Locate the solenoid inlet valves at the rear of the machine
Grip and twist the valve from inside at the same time release plastic tabs
Grip and twist the hot water valve from inside
Twist the valve a full 90 degrees to enable removal
Remove the valve from the rear casing
Make a note of the wires (a photograph is useful) and remove them
Wires removed. Now remove the dispenser inlet pipe
Pipe removed
Grip and twist the valve from inside at the same time release plastic tabs
Grip and twist the cold water valve from inside
Twist the cold water valve a full 90 degrees and remove it
Make a note of the wires (a photograph is useful) and remove them
Wires removed. Now remove the dispenser inlet pipes
Dispenser inlet pipes removed
Take the new cold water valve from its package ensuring its correct for machine
Take the new hot water valve from its package ensuring its correct for machine
Fit the 2 dispenser pipes to the cold water valve
Fit the wires to the cold water valve
Locate the cold water valve into the rear casing
Twist the cold water valve into its correct position
Fit the dispenser hose onto the hot water valve
Fit the wires onto the hot water valve
Locate the hot water valve into the rear casing
Twist the hot water valve into its correct position
Relocate the lid and slide forward to engage it
Using the T15 torx spanner replace the 2 lid retaining screws
Replace the 2 screw cover caps

See full range of washing machine parts and solenoid valves here

Tools required can be purchased here

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.