How to change the drive belt on a washing machine Ariston AIB16

How to change the drive belt on a washing machine Ariston AIB16
Safety first Remove the plug from the mains supply
Tools required are a Phillips screwdriver and a 10mm spanner
Using a phillips headed screwdriver remove screws holding the back panel.
Protect the machine with a dust-sheet and lay it on its face
Using the 10mm spanner loosen the nut on 1 motor retaining bolt
Using the 10mm spanner remove the nut on the other motor retaining bolt
Remove the motor retaining bolt to release the tension of the belt
Remove the belt from the drum pully
Remove the belt from the drive pulley
Belt removed
Take the new belt from its package ensuring its correct for the appliance
Place the new belt onto the drive pully
Now place the belt onto the drum pulley
Replace the motor retaining bolt to tension the belt
Using the 10mm spanner replace the nut on the motor retaining bolt & tighten
Tighten the other motor retaining bolt and stand the machine up
Replace the back panel and tighten the retaining screws

See full range of washing machine spares and belts here

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.