How to change the ignition switch on a Gas Cooker
How to change the ignition switch on a Gas Cooker- Safety First:Remove the Plug from the Mains Socket
- Tools required: A Phillips Screwdriver & a Flat Head Screwdriver
- INDESIT K341G W/G
- Locate the burner control knobs
- Grip the control knob and pull towards you
- Pull the burner control knob off of the gas tap
- Pull the remaining burner control knobs off of the gas taps
- Burner control knobs removed
- Using the phillips screwdriver remove the dashboard retaining screws
- Remove further dashboard retaining screws
- Slide the dashboard to the left
- Pull the dashboard forwards and remove it
- Make a note of the wires (a photograph is useful) and remove them
- Wires removed
- Using the small flat screwdriver prise the switch support away from the switch
- Grip the switch and release from the switch support
- Remove the switch
- Switch removed
- Turn the dashboard over and grip the ignition button
- Remove the ignition button
- Ignition button removed
- Take the ignition switch from its package ensuring its correct for the appliance
- Position the new switch into the switch support and push it into place
- Replace the ignition button
- Push the ignition button onto the ignition switch
- Replace the wires
- Reposition the dashboard
- Slide the dashboard to the right to locate it
- Replace the dashboard retaining screws
- Using the phillips screwdriver tighten the dashboard retaining screws
- Dashboard in position
- Note the shape of the aperture on the knob
- Place the control knob onto the gas tap
- Push the control knob all the way onto the gas tap
- Replace the burner control knobs onto the remaining gas taps
- The appliance is now ready for use
Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.
Comments