Alphabetical Brand Index

How to change the oven inner door & glass on a cooker Indesit K341G

  1. Cooker & Oven
    How to change the oven inner door & glass on a cooker Indesit K341G
  2. Safety First:Remove the Plug from the Mains Socket
    Safety first 2
  3. Tools Required: A Phillips Screwdriver & a Flat Head Screwdriver
    Phillips & small flat screwdriver (Small)
  4. INDESIT K341G W/G
    K341G Image
  5. Using the phillips screwdriver remove the handle retaining screws
    K341G Oven Door Glass 1
  6. Remove further handle retaining screws
    K341G Oven Door Glass 2
  7. Gently pull the handle and door glass away from the door
    K341G Oven Door Glass 3
  8. Gently remove the door glass away from the door track at the bottom
    K341G Oven Door Glass 4
  9. Door glass removed from bottom track
    K341G Oven Door Glass 5
  10. Oven door glass and handle removed now open the door
    K341G Oven Door Glass Removed
  11. Using a flat head screwdriver raise the hinge locking latch
    K341G Inner Door 1
  12. Twist the locking latch over as far as it will go
    K341G Inner Door 2
  13. Using a flat head screwdriver raise the hinge locking latch on the other hinge
    K341G Inner Door 3
  14. Twist the locking latch over as far as it will go
    K341G Inner Door 4
  15. Close the door a small amount until the door comes up against the locking latch
    K341G Inner Door 5
  16. Check the door comes up against the locking latch on the other hinge
    K341G Inner Door 6
  17. Now lift the door away from the cooker cabinet
    K341G Inner Door 7
  18.  Lift the door away from the cooker cabinet on both sides
    K341G Inner Door 8
  19. Hinge removed from the cooker cabinet
    K341G Inner Door 9
  20. Hinge removed from the cooker cabinet on the oposite side
    K341G Inner Door 10
  21. Turn the door over and remove the hinge retaining screws
    K341G Hinge 1
  22. Remove the hinge from the door
    K341G Hinge 2
  23. Remove the hinge retaining screws on the opposite side
    K341G Hinge 3
  24. Remove the hinge from the door
    K341G Hinge 4
  25. Remove the door lower trim
    K341G Door Lower Trim
  26. Door with hinges removed
    K341G Hinges Removed
  27. Take the new oven inner door & glass from its package ensuring its correct for the appliance
    K341G Oven Inner Door & Glass Image
  28. Replace the door lower trim
    K341G Door Lower Trim
  29. Fit the hinge to the new door
    K341G Hinge 4
  30. Using the phillips screwdriver replace the hinge retaining screwsK341G Hinge 3
  31. Fit the hinge to the new door on the opposite side
    K341G Hinge 2
  32. Using the phillips screwdriver replace the hinge retaining screws
    K341G Hinge 1
  33. Locate the hinges into the cooker cabinet
    K341G Inner Door 8
  34. Locate the hinges into the cooker cabinet on both sides
    K341G Inner Door 7
  35. Push the hinges well into the cabinet
    K341G Inner Door 4
  36. Push the hinges well into the cabinet on both sides
    K341G Inner Door 2
  37. Open the door fully & raise the hinge locking latch
    K341G Inner Door 1a
  38. Push the hinge locking latch down into position
    K341G Inner Door 1b
  39. Raise the hinge locking latch on the opposite side 
    K341G Inner Door 1c
  40. Push the hinge locking latch down into position
    K341G Inner Door 1d
  41. Fit the door glass into the bottom door track
    K341G Oven Door Glass 5
  42.  New door glass in bottom door track
    K341G Oven Door Glass 4
  43. Locate the door handle and glass into the door, lining up the screws correctly 
    K341G Oven Door Glass 3 
  44. Handle and door glass in place
    K341G Oven Door Handle 2
  45. Using the phillips screwdriver tighten the door handle retaining screws
    K341G Oven Door Glass 2
  46. Tighten further door handle retaining screws
    K341G Oven Door Glass 1
  47. The appliance is now ready for use
    K341G Image

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Loading...
Need help?