How to change the upper wash arm feed pipe on an Indesit Dishwasher

How to change the upper wash arm feed pipe on an Indesit Dishwasher
Safety First:Remove the Plug from the Mains Socket
Tools required:Phillips Screwdriver & a Socket for Jubilee Clips
Indesit DI620 Integrated Dishwasher
Using the phillips screwdriver remove the lower back panel retaining screws
Remove further lower back panel retaining screws
Remove further lower back panel retaining screws
Remove further lower back panel retaining screws
Remove lower back panel and set aside
Grip the top basket runner end stop and twist outwards
Basket runner end stop twisted out
Basket runner end stop twisted out on the other side
Remove the top basket
With the basket removed locate the upper was arm feed pipe retaining nut
Grip the retaining nut and unscrew to remove it
Retaining nut removed
Remove the shaped plastic locater
From the rear of the appliance locate the Upper wash arm feed pipe
Release the jubilee clip connecting the pump junction pipe to the feed pipe
Grip the feed pipe and remove it from the pump junction pipe
Feed pipe removed
Remove the feed pipe from the rear of the appliance
Take the new feed pipe from its package ensuring its correct for the appliance
Fit the new feed pipe to the rear of the appliance
Fit the new feed pipe to the pump junction hose
Make sure the new feed pipe is pushed well into the pump junction hose
Replace and tighten the jubilee clip to the pump junction hose
Feed pipe in position
Replace the shaped plastic locater & make sure it fits centrally
Replace the feed pipe retaining nut
Tighten the feed pipe retaining nut firmly by hand
Replace the upper basket & as you push it in the end stops will relocate
Replace lower back panel
Using the phillips screwdriver replace lower back panel retaining screws
Replace further lower back panel retaining screws
Replace further lower back panel retaining screws
Replace further lower back panel retaining screws
The appliance is now ready for use

See full range of dishwasher parts here

Tools required can be purchased here

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.