How to change the upper wash arm feed pipe on an Indesit Dishwasher

  1. Dishwasher
    How to change the upper wash arm feed pipe on an Indesit Dishwasher
  2. Safety First:Remove the Plug from the Mains Socket
    Safety first 2
  3. Tools required:Phillips Screwdriver & a Socket for Jubilee Clips
    Phillips screwdriver & jubilee socket
  4.  Indesit DI620 Integrated Dishwasher
    D1620 Door Image
  5. Using the phillips screwdriver remove the lower back panel retaining screws
    DI620 Lower Back Plate 1
  6. Remove further lower back panel retaining screws
    DI620 Lower Back Plate 2
  7. Remove further lower back panel retaining screws
    DI620 Lower Back Plate 3
  8. Remove further lower back panel retaining screws
    DI620 Lower Back Plate 4
  9. Remove lower back panel and set aside
    DI620 Lower Back Plate 5
  10. Grip the top basket runner end stop and twist outwards
    DI620 Feed Pipe 2
  11. Basket runner end stop twisted out
    DI620 Feed Pipe 3
  12. Basket runner end stop twisted out on the other side
    DI620 Feed Pipe 4
  13. Remove the top basket
    DI620 Feed Pipe 1
  14. With the basket removed locate the upper was arm feed pipe retaining nut
    DI620 Feed Pipe 5
  15. Grip the retaining nut and unscrew to remove it
    DI620 Feed Pipe 6
  16. Retaining nut removed
    DI620 Feed Pipe 7
  17. Remove the shaped plastic locater
    DI620 Feed Pipe 8
  18. From the rear of the appliance locate the Upper wash arm feed pipe
    DI620 Feed Pipe 9
  19. Release the jubilee clip connecting the pump junction pipe to the feed pipe 
    DI620 Feed Pipe 10
  20. Grip the feed pipe and remove it from the pump junction pipe
    DI620 Feed Pipe 11
  21. Feed pipe removed
    DI620 Feed Pipe 12
  22. Remove the feed pipe from the rear of the appliance
    DI620 Feed Pipe 13
  23. Take the new feed pipe from its package ensuring its correct for the appliance
    DI620 Upper Wash Arm Feed Pipe
  24. Fit the new feed pipe to the rear of the appliance
    DI620 Feed Pipe 13
  25. Fit the new feed pipe to the pump junction hose
    DI620 Feed Pipe 12
  26.  Make sure the new feed pipe is pushed well into the pump junction hose
    DI620 Feed Pipe 11
  27. Replace and tighten the jubilee clip to the pump junction hose
    DI620 Feed Pipe 10 
  28. Feed pipe in position
    DI620 Feed Pipe 9
  29. Replace the shaped plastic locater & make sure it fits centrally
    DI620 Feed Pipe 8
  30. Replace the feed pipe retaining nut
    DI620 Feed Pipe 7
  31. Tighten the feed pipe retaining nut firmly by hand
    DI620 Feed Pipe 6
  32. Replace the upper basket & as you push it in the end stops will relocate
    DI620 Feed Pipe 1
  33. Replace lower back panel
    DI620 Lower Back Plate 5
  34. Using the phillips screwdriver replace lower back panel retaining screws
    DI620 Lower Back Plate 4
  35. Replace further lower back panel retaining screws
    DI620 Lower Back Plate 3
  36. Replace further lower back panel retaining screws
    DI620 Lower Back Plate 2
  37. Replace further lower back panel retaining screws
    DI620 Lower Back Plate 1
  38. The appliance is now ready for use
    D1620 Door Image

    See full range of dishwasher parts here

    Tools required can be purchased here

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.

Comments

Loading...
Need help?