How to change warming drawer door fascia on a cooker Indesit K341G

How to change warming drawer door fascia on a cooker Indesit K341G
Safety First:Remove the Plug from the Mains Socket
Tools Required: Phillips screwdriver
INDESIT K341G W/G
Open the warming drawer door
Using the phillips screwdriver remove the fascia retaining screws
Remove further retaining screws
Remove the screws
Un clip the fascia from the door
Un clip the fascia on the other end of the door
Slightly pull the fascia away from the door
Push the fascia down to release it from the bottom of the door
Fascia released from the door
Fascia removed from the door
Take the new fascia from its package ensuring its correct for the appliance
Fit the new fascia to the door
Locate the new fascia to the bottom of the door
Push the new fascia in towards the door
Clip the new fascia into the door
Fascia clipped into the door
Clip the new fascia into the door on the other side
Fascia clipped into the door
Replace the fascia retaining screws
Using the phillips screwdriver tighten the fascia retaining screws
Tighten the fascia retaining screws on the other side
New fascia in place
The appliance is now ready for use

See full range of oven and cooker parts here

Tools required can be purchased here

Disclaimer: The information provided has been prepared as a guide only and the steps taken are likely to vary for different appliance models. We strongly recommend using a qualified engineer to undertake major repairs and fault finding.