Household Appliance Spares Matching '102 Washing Machines'
Door Interlock Hoover 102a by Yourspares
£11.95 Only 1 Left in Stock
Azkoyen/Danube/Domus/Fagor Coffee Grinder Microswitch Omron D3v-166-1c5 by Azkoyen
£9.13 High Stock Levels
Ambach/Fagor/Fri Fri/KÜppersbusch Boiling Pan Electric Contactor Aeg Ls11k 25a 400v 11kw by Ufixt
£99.42 In Stock
Fagor Convection Oven Adjuster For Outlet T&p Green by Ufixt
£5.45 High Stock Levels
Bianchi/Nuova Simonelli/Rheavendors/Saeco Vending Machine Cylinder Head Screw M4x16 by Ufixt
£4.30 High Stock Levels
Knob Brown for Hotpoint/Gala Washing Machines by Hotpoint
Top Cover Trim Lh for Hotpoint/Gala Washing Machines by Hotpoint
Ariston/Candy/Capic/Comenda Washing Machine Solenoid Valve T&p 1-way 180° by Ufixt
£7.32 High Stock Levels
Comenda/Convotherm/Desco/Dexion Glasswasher/cupwasher Solenoid Valve Elbi Type 369 3-way 180° by Ufixt
£26.26 High Stock Levels
Adler/Bianchi/Comenda/Fagor Dishwasher Cylinder Head Screw M4x10 by Ufixt
£4.28 High Stock Levels
Latest Product Reviews
Cooker Control Panel for Cannon/Creda/Hotpoint Cookers and Ovens
Good product, good price
No problems with this item.
George
bySupport & Bearings for Hotpoint/Creda/Electra/Gala Washing Machines
Spiders from Bognor
Bought this to replace the bearings that were on the way out for a Hotpoint WM75. Now all the neighbours no longer know when I'm doing my laundry.
Graham
byOven Door Hinge for Creda/Hotpoint/Cannon/Jackson Cookers and Ovens
Does what it says
Prompt delivery and a perfect fit. The hinge is an exact replacement for the original.
Jack
byWashing Machine Motor Carbon Brush And Holders Pack Of 2
Brushes were fine.
Didn't solve my problem but not the fsult of the brushes.
Mike
byWashing Machine & Washer Dryer Motor Brush for Hotpoint/Creda Washing Machines
Hotpoint Carbon Brushes
The symptom was the machine would stop halfway through a cycle. Particularly evident during the spin cycles. The brushes when they arrived were very stiff in the metal sleeve and this didn't seem correct. I removed some of the carbon with a blade so that the carbon rods had free movement. This seemed to cure the problem and the machine now runs perfectly, although to be honest I need to do more washes to be absolutely confident that this was the problem.
Robert
by