Hotpoint TVAL73C6GZUK Tumble Dryer and Spin Dryer Spares and Parts
Hotpoint TVAL73C6GZUK Tumble Dryer and Spin Dryer Spares
Hotpoint TVAL73C6GZUK Harness Con/power Bd for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Kickstrip Grahite M2 Vented for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Front Panel Graphite Vented for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Table Top Grey Vente D for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Door Front Trim Grap Hite for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Tumble Dryer Control Knob for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Door Trim Rear Grey for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Air Duct Vented M2 for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Drum Front Axial Sea L Vented M2 for Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint TVAL73C6GZUK Door Seal Grey for Tumble Dryers and Spin Dryers by Hotpoint
Latest Hotpoint TVAL73C6GZUK Tumble Dryer and Spin Dryer Product Reviews
Hotpoint Vented 9 Rib Stretch Tumble Dryer Drive Belt Polyvee - 1860 9PHE
Tricky to fit!!
First rate service, good delivery, as with any belt on a domestic appliance it's tricky to fit, but with some effort and a lot of swearing it's on, working a treat!!
Anonymous
byHotpoint Vented 9 Rib Stretch Tumble Dryer Drive Belt Polyvee - 1860 9PHE
Does the job easily
Arrived quickly but took a while to fit. You have to take the machine apart and then you need a little ingenuity to fit the belt onto the motor spindle unless you have an adjustable one. The older ones don't have. You can buy a special tool for £15 or use an old wooden spoon like me. Put the belt around the drum, then loop a little round the handle of the spoon near the bowl, put a slight twist in the belt so the spoon is at 90 degrees to the motor and put the other end of the handle under the spindle and gradually push and slide it down and forward until the belt hits under the spindle. You should now be able to turn the spoon through 90 degrees to be in line with the motor, untwisting the belt and dropping it on the spindle completely, and then roll the spoon handle around the spindle until it is free in the gap between the drum and motor. Reassemble.
Philip
byHotpoint Vented 9 Rib Stretch Tumble Dryer Drive Belt Polyvee - 1860 9PHE
Good Service
Thanks YOURSPARES.
See you soon
Akthar
by