Hotpoint 9529A Washing Machine Spares and Parts
Hotpoint 9529A Washing Machine Spares
Hotpoint 9529A Timer for /Creda Washing Machines by Hotpoint
Hotpoint 9529A O/load 800/1200 for /Creda Washing Machines by Hotpoint
Hotpoint 9529A Pump for /Creda Washing Machines/Cookers and Ovens by Hotpoint
Hotpoint 9529A Latch Door for /Gala Washing Machines by Hotpoint
Hotpoint 9529A Plate Connecting Brn for /Gala Washing Machines by Hotpoint
Hotpoint 9529A Handle Door Release for /Gala/Export Washing Machines by Hotpoint
Hotpoint 9529A Locking Butt for /Export Washing Machines/Tumble Dryers and Spin Dryers by Hotpoint
Hotpoint 9529A Door Trim Brown F&f for /Gala Washing Machines by Hotpoint
Hotpoint 9529A Thermostat(blue-83c) for /Creda/English Electric Washing Machines by Hotpoint
Hotpoint 9529A O Ring for /Creda/Electra/Gala Washing Machines by Hotpoint
Latest Hotpoint 9529A Washing Machine Product Reviews
Support & Bearings for Hotpoint/Creda/Electra/Gala Washing Machines
Spiders from Bognor
Bought this to replace the bearings that were on the way out for a Hotpoint WM75. Now all the neighbours no longer know when I'm doing my laundry.
by Graham
Washing Machine Door Bowl Retainer for Hotpoint/Export/Creda Washing Machines
Door retainers
Product is fine and does what it is supposed to do , but they are very expensive for a bit of plastic, then again a new glass door would be much more.
by Anonymous
Washing Machine Door Bowl Retainer for Hotpoint/Export/Creda Washing Machines
Retaining Screws for our very old Tumble Dryer glass door
I purchased a single plastic retainer screw for our glass in Hotpoint tumble dryer door. As this seemed to be perfect I purchased a further 3 therefore replacing all retaining screws (as existing ones were showing signs of wear and tear).. Absolutely perfect so far.
by Charles
Washing Machine Motor Carbon Brush And Holders Pack Of 2
Brushes were fine.
Didn't solve my problem but not the fsult of the brushes.
by Mike
Washing Machine & Washer Dryer Motor Brush for Hotpoint/Creda Washing Machines
Hotpoint Carbon Brushes
The symptom was the machine would stop halfway through a cycle. Particularly evident during the spin cycles. The brushes when they arrived were very stiff in the metal sleeve and this didn't seem correct. I removed some of the carbon with a blade so that the carbon rods had free movement. This seemed to cure the problem and the machine now runs perfectly, although to be honest I need to do more washes to be absolutely confident that this was the problem.
by Robert
